Tiki Coasters - 4 Colors - Hueforge Filament Painting Remixed by ShakaStudio

Remixed by

ShakaStudio

Art>2D Art

Print Profile(3)

All

P1P

P1S

X1 Carbon

X1E

0.16mm layer, 2 walls, 100% infill

Designer

2.5 h

1 plate

3.7(3)

4 Colors AMS, 0.16mm layer, 3 walls, 100% infill

2.5 h

1 plate

5.0(2)

3 Colors AMS, 0.16mm layer, 3 walls, 100% infill

2.5 h

1 plate

Open in Bambu Studio

Boost

115

Released

Description

You can mix and match any colors.

I suggest use:

Color 1 : Black

Color 2 : Dark Hue Color

Color 3 : Light Hue Color

Color 4 : White

Print at 100% infill with a layer height of 0.16mm with a base layer of 0.24mm

Swap Instructions:
Start with Matte Black
At layer #12 (2.88mm) swap to Red
At layer #16 (3.2mm) swap to Fl Red
At layer #21 (3.6mm) swap to White for the rest.

Comment & Rating (19)

@3Deekes

they look great! could you maybe share which colours you used from your picture! awesome design!

The designer has replied

@ShakaStudio

Of Course! I've designed these to make sure they will look good with almost any dark->light color combo. So feel free to experiment, I promise they will look good, if you use a dark color for color2 and light color for color3. I have used : Black -> Yellow -> Fluorescent Yellow/ Tan -> White Black -> Fire Engine Red -> Red -> White Black -> Forest Green -> Bambu Basic Green-> White Black -> Navy Blue -> Light Blue -> White You can also try monochrome: Black -> Night Gray -> Light Gray -> White

@3Deekes

Replying to @ShakaStudio :

awesome, i am waiting for another print to finish , i’ll come back here to post my makes. thanks for the answer!

@ShakaStudio

Replying to @3Deekes :

Anytime! Feel free to ask any more questions if needed! Looking forward to seeing your make!

@NeoKoiPrints

Print Profile

0.16mm layer, 2 walls, 100% infill

The designer has replied

@ShakaStudio

Looking good! Thanks for the very first review on this!

(Edited)

@ludovicvasseur3

Print Profile

4 Colors AMS, 0.16mm layer, 3 walls, 100% infill

The designer has replied

@Botaz19

Hi there Sir, would you mind if i used your picture as the print profile main picture?

(Edited)

@jappi247

Print Profile

4 Colors AMS, 0.16mm layer, 3 walls, 100% infill

(Edited)

@CAD_MasterRR

Print Profile

0.16mm layer, 2 walls, 100% infill

spaghetti :/

The designer has replied

@ShakaStudio

Do you mean with initial layer adhesion ? I recommend cleaning your build plate with soap water. Then using some liquid glue or glue stick. The profile and print works great!