A really fun and easy to print desk toy!

Print in PLA or any other stiff material. Print in the orientation of the STL files, no supports needed. Takes less than 2 hours to print for the spinner + stand.

This is the bearingless version of my Ferris wheel desk toy (with 608 or 689 bearings). The stand is the same for both marble sizes.

Hardware required:

• 9 M3x8mm bolts (length 5-8mm bolts will work too)
• 5 Marbles 14mm or 16mm
• 608 or 689 bearing (only for this version)

For marbles 13.5-15.5mm I recommend the 14mm version. For marbles bigger than 15.5mm (but no more than 17) I recommend the 16mm version.