Supports minimum volume of 10cmx10cm smt steel mesh
BOM:
- 8x M3x4x4.2mm Heat Insert Nut (M3 thread with 4.2mm outer diameter, 4mm length)
![](https://media.printables.com/media/prints/741194/rich_content/a58d3865-7d2e-46c7-81f2-533326ae58eb/thumbs/cover/800x476/png/qqjie-tu-20240129194406.webp?image_process=format,webp)
- 8X M3X5mm Phillips countersunk screws
![](https://media.printables.com/media/prints/741194/rich_content/a1e82756-7e98-4a09-ab13-d641ea72f922/qqjie-tu-20240128151344.png?image_process=format,webp)
![](https://media.printables.com/media/prints/741194/rich_content/2c484390-e733-41e0-8c88-e7d81f088185/thumbs/cover/800x524/png/qqjie-tu-20240128152729.webp?image_process=format,webp)
![](https://media.printables.com/media/prints/741194/rich_content/d087ba4b-459c-46dd-bed1-30f757c5c7b4/qqjie-tu-20240128153600.png?image_process=format,webp)
![](https://media.printables.com/media/prints/741194/rich_content/0793a118-9e4c-4bc2-bc41-86f7836e4567/thumbs/cover/800x258/jpg/m4luo-mu-7ge.webp?image_process=format,webp)
- 4X M4X15mm Phillips Pan Head Screws
![](https://media.printables.com/media/prints/741194/rich_content/3ca6733b-d881-44e3-ad6b-071ea4e61003/thumbs/cover/800x798/png/qqjie-tu-20240128155209.webp?image_process=format,webp)
Printing Tips:
- If you print with AMS, you need at least 5 layers on top of the four sliders
- Four of the weaker parts of the base needed to be strengthened. In the 3mf file I provided, I used the modifier and increased the fill to 60%
![](https://makerworld.bblmw.com/makerworld/draft/561763/2024-02-21_dba4ebc71f4a6.png?image_process=format,webp)
![](https://makerworld.bblmw.com/makerworld/draft/561763/2024-02-21_74cb771efe4d7.png?image_process=format,webp)
Gdemon X Watkins