Description

Side facing door mount for Mijia/xiaomi 360 2k cameras for Bambu Lab printers.

Features:

• Door can be fully opened without needing to move the camera
• Camera angled slightly down at print bed to better see first layer squish
• Adjustable camera distance
• Hidden cable channel for a cleaner look
• Camera remains easily removable

Hardware required:

• 2x M3 hex nuts
• 2x M3 x 6 mm screws
• 4x M3 x 10 mm or longer screws

Instructions:

• Add 2x M3 hex nuts to the underside of the base arm
• Use 2x M3 x 10 mm (or longer) screws to bolt together the base arm and camera mount
• Remove the 2x screws at the upper left of the printer door. Keep the washers in place
• Use 2x M3 x 6 mm screws to bolt the base to the door
• Mount the camera by twisting it into the Mijia camera mount

Print settings:

• Print as orientated
• Support: manaual (only for the camera mount)
• Overhang speed: if having issues printing the overhang of the base, try 20 mm/s

Notes:

• Adding better lighting (e.g. riser and LED strip or ring light) will improve the glare and image quality