Hello!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Dark Red
At layer #18 (1.52mm) swap to Ash Gray
At layer #20 (1.68mm) swap to Jade White for the rest.
Please feel free to share your results!