由于我的有很多零散的工具，所以根据一些已有的模型进行了一个组合收纳的设计。因为一般使用时并不会同时拥有过多的打印板，所以我将打印板的插槽数量减少到了4个，并且在旁边设计了杂物格以及胶水储存格。整体盒子分为2个部分，分别打印后用胶水进行连接。我使用的是哑光暗夜红PLA材料进行打印，参数为0.2mm layer, 2 walls, 15% infill。打印过程中请使用标准模式而非更快的速度模式以保证模型表面的光滑度。希望你喜欢这个设计！

Due to my collection of numerous scattered tools, I've designed a combination storage solution based on existing models. Since one typically does not possess an excessive number of printing boards simultaneously, I reduced the number of slots for printing boards to four and incorporated compartments for miscellaneous items and glue storage on the side. The overall box is divided into two parts, which are connected using glue after printing. I used matte dark red PLA material for printing, with parameters set to 0.2mm layer height, 2 walls, and 15% infill. Please use the standard mode instead of the faster speed mode during printing to ensure smoothness of the model's surface. I hope you enjoy this design!