WL toys 104002 RC car is a very popular RC Car, but the battery runs out very quickly. I bought a better battery but the size was way bigger than the stock battery. This file is my solution to be able to use a bigger battery (but you can still use the stock battery, as per attached photos). Once printed, you just need to clip the piece to the chassis of the car, it should clip on the frame (almost) perfectly.
Please note that this model can also be printed without support: you need to change the orientation of the model, and you will need double time to print it. I made a try, 0.24mm draft, 10% infill, 2 walls = 59min29s to print.
As I am new to the 3D printing world, I would really appreciate if you can let me know what you think about this file ;)
Thank you!