Conveyor belt fully 3D printed
Copyright Claim
Conveyor belt fully 3D printed
Boost
60
78
6
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
10.3 h
5 plates
Boost
60
78
6
3
102
57
Released
Description
A fully functional Conveyor belt with a length of 30cm. No external Parts or Glue are needed.
The conveyor belt is very variable. You can attach the wheel to each side or even attach 4 wheels to all corners.
The thread of the screws and the wheel are screwed on counterclockwise.
For 30cm you need 84x chain links.
For assembly, please see the pictures.
→ The assembly of the chain links requeries some force ;-)
→ The final assembly (putting on the outer walls) requires a little patience and feeling
→ If you download the raw files, you still need to mirror the outer wall (x-axis)
If you need an extension for a longer conveyor belt , please let me know.
Documentation (5)
Assembly Guide (5)
Comment & Rating (6)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
it was hard to make the conveyer usable without breaking it
The designer has replied
0
Reply
I am very sorry that you had problems assembling it. I had no such problems. I only ever printed 3 chain links and therefore had to connect the chain links very often. I will add a few more pictures of the assembly in the next few days.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
fantastic, easy to print and fully functional
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
(Edited)
1
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld