This design has been created to place a raspberry tft with klipperscreen in our kp3s Pro.
NOTE: This is only compatibility with raspberry pi zero 2w or another model with the same dimensions.
You can buy me a coffee with a donation. Me puedes invitar a un café haciendo una donación Click to donate
Commercial components
Optional
The printing part are designed to 0.4 nozzle, Infill should not be less than 20%, recomended 25- 30%
The stl are shared in the correct position for best printing without supports
4. Connect the raspberry to the TFT
5. LCD Installation
Resource: http://www.lcdwiki.com/3.5inch_RPi_Display
Open terminal(SSH) and install the driver on RaspberryPi
sudo rm -rf LCD-showgit clone https://github.com/goodtft/LCD-show.gitchmod -R 755 LCD-showcd LCD-show/sudo ./LCD35-show
Wait A Few Minutes, when the system reboot ok, you can see that.
Rotate the display, execute the following command:
cd LCD-show/sudo ./rotate.sh 90
5. Installing Klipper Screen
Resource: https://klipperscreen.readthedocs.io/en/latest/Installation/
The purchase links are affiliate links. If you buy through them you can help me continue creating designs. Thank you