AMS Buffer PTFE Tube Easy Release
Copyright Claim
AMS Buffer PTFE Tube Easy Release
Boost
84
197
51
Print Profile(1)
0.16mm layer, 3 walls, 20% infill
Designer
25 min
1 plate
Open in Bambu Studio
Boost
84
197
51
5
372
250
Released
Description
PURPOSE = This part will help you release the PTFE tube coming out of the AMS into the buffer.
This is technically a remix of https://makerworld.com/en/models/72083#profileId-76216 which for some reason is not allowing remixes. So we'll just say I was inspired by the design instead.
I liked the concept but didn't want to take apart anything. Look at the video they posted to see how it works.
UPDATES = in this design include slots to allow the part to flex when inserting it so that you can just remove the PTFE tube, push it in, and put the tube back in.
MATERIAL = PLA will probably work but might not flex and just break. So I would recommend PETG or better.
Comment & Rating (51)
All
Print Profile
0.16mm layer, 3 walls, 20% infill
printed ok
0
Reply
This little thing works great! Especially when needing to remove everything from our P1S to do monthly maintenance on our printer. Printed with Crystal Clear PLA+ from IIIDMax.
0
Reply
Print Profile
0.16mm layer, 3 walls, 20% infill
i printed it in ABS and fits well
0
Reply
Print Profile
0.16mm layer, 3 walls, 20% infill
Works perfectly! Great fix
0
Reply
Print Profile
0.16mm layer, 3 walls, 20% infill
Passt
0
Reply
Boosted
Very usefull and no need to dissasemble the buffer. Great idea! No tools needed
0
Reply
Boosted
Just what I needed and stays put.
0
Reply
Boosted
Print Profile
0.16mm layer, 3 walls, 20% infill
Works perfectly and stays put. I inverted it for printing so the larger flat side was on bottom.
0
Reply
Print Profile
0.16mm layer, 3 walls, 20% infill
this is awesome
0
Reply
Print Profile
0.16mm layer, 3 walls, 20% infill
good print however i tried it with the AMS management system and found it is a bit too liong and can’t be used in conjunction. needs to be about 3-4mm shorter
(Edited)0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld