Made this for a friend of mine I hope you all enjoy!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Skin Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #19 (1.6mm) swap to Red
At layer #24 (2mm) swap to Skin
At layer #27 (2.24mm) swap to White for the rest.