The Lion King is one of my favorte Disney movie and thats why i designed this shadowbox in combination with Hueforge.

All slides are using the same print settings. The box and the cap can be printed at 0.2 layer height.

All settings in the profile are correct

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #9 (0.8mm) swap to Yellow
At layer #12 (1.04mm) swap to Jade White for the rest.

Thanks for download and enjoy printing

Please share your makes.