[3DP RNS] Hexnake_V1.0 by 3DP RNS

3DP RNS

Toys & Games>Characters

Print Profile(8)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

[3DP RNS] Hexnake_V1.0 / 0.2mm layer, 2 walls, 15% infill

Designer

3.2 h

1 plate

4.5(131)

A1mini 0.2mm layer, 2 walls, 15% infill

2.1 h

1 plate

4.4(27)

GYORID infill 0.2mm layer, 2 walls, 10% infill

3.1 h

1 plate

4.7(3)

0.2mm layer, 2 walls, 15% infill

3.2 h

1 plate

4.4(5)

Click to see more

Boost

822

1144

395

2.8 k

1.7 k

Released

Description

★ New Robot Unveiled!

[3DP RNS] Hexnake V1.0 (3D Printed Robot)

Series : 0 Legs / Snake Type
This Is an all at once print. Assembly not required :)
If you subscribe to the YouTube channel [3DP RNS], ★ a new robot will be revealed.
Thank you for your subscribing! It means a lot to me :)
Commercial License [Patreon]

※ Notice
For my uploaded robot model to enable all joints to move, it's advisable to use a Brim.
If removing Brim is inconvenient or challenging, I don't recommend printing it.
Also, joint functionality may vary depending on the printer and filament you use.
I hope your print is successful and you can have a robot with well-functioning joints.

ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

[3DP RNS] Swift & Stand V1.0 (3D Printed Robot)

[3DP RNS] Swift & Stand V1.0 Download [Patreon]
Swift & Stand V1.0 can be obtained through Patreon (Hero) membership.
It is an autonomous flying robot with four propellers.It moves swiftly, quietly, and is used for reconnaissance purposes.

Comment & Rating (395)

@user_1301250370

Print Profile

[3DP RNS] Hexnake_V1.0 / 0.2mm layer, 2 walls, 15% infill

worked very well! it did break at one part while I was trying to get it loose. but it’s because I used PLA. but other than that it is so cool! thanks!

The designer has replied

@3DPRNS

You left two comments. That must mean you like this robot, right? I hope you try printing with other robots as well. And I hope there are no issues with your printing. If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)

@mscbusn

New rating. previous were not mine. My print was not successful. I could not articulate the snake at all. The bottom layer was not smooth. I could not cut off the material on the bottom or between different parts. I am new to this. What settings should I use? The snake is black because we have black snakes in this area of North Carolina.

@user_1301250370

Replying to @mscbusn :

man. there is a lot going on there. not sure what machine you are printing with, but you’ll need to fix a bunch of issues with your printer before printing something like this. level bed, adjust z-axis, adjust the e-steps. etc. I’d start with this first.

(Edited)

@3DPRNS

What is next? Don't forget to subscribe to my YouTube channel :)

@reactorjam8

Boosted

motor bike also I love your models

@KlemK

Print Profile

A1mini 0.2mm layer, 2 walls, 15% infill

This a great print.

@3DPRNS

Perfect! The colors are striking and impressive. The photo of the robots gathered at the base is really cool. Thank you for the photo, comment, and printing!

(Edited)

@user_1101920104

the first layer clumped up and had to cancel print

@Daniel_D

Print Profile

[3DP RNS] Hexnake_V1.0 / 0.2mm layer, 2 walls, 15% infill

Great print! Slightky looser than I thought it would be, but that’s probably because I scaled it up a bit. Still amazing and would highly recommend! This one is in Bambu sparkly red PLA on a textured PEI Plate on the X1C.

The designer has replied

@3DPRNS

It printed beautifully in red! It looks amazing! Thank you for sharing your detailed printing experience in the comments. I appreciate you keeping the pictures, comment, and printing! If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)

@Daniel_D

Replying to @3DPRNS :

subscribed!

@3D_SAX

Print Profile

[3DP RNS] Hexnake_V1.0 / 0.2mm layer, 2 walls, 15% infill

Top

The designer has replied

@3DPRNS

Your print turned out well without any issues. The yellow accent color stands out. Thanks for the photo, comment, and the printing! If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)

@3D_SAX

Replying to @3DPRNS :

Fatto, mi sono iscritto al canale YouYube... ancora complimenti

@user_2061008143

Printed perfectly. All joints work, no breaking.

The designer has replied

@3DPRNS

Thanks for the picture, comment, and printing! I'm pleased that your printing turned out well. The colors also match the image I uploaded. If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)

@aggdaddy

Came out pretty good. I don't usually make multicolor prints, but this one I liked.

The designer has replied

@3DPRNS

Wise judgment :) Your robot has been printed with cool colors. It looks like a cybernetic robot. Thanks for the pictures, comments, and printing! If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)

@Uranio3D

Print Profile

[3DP RNS] Hexnake_V1.0 / 0.2mm layer, 2 walls, 15% infill

Took chance and printed with no brim and it came out awesome. After carefully breaking the stiffness it is smooth but still holds its position. My son's favorite snake so far. Now to give the scorpion a try and see how that comes out.

The designer has replied

@3DPRNS

Thank you for the picture and comment. Looking at the photos, it seems that the robot printing turned out well. The robot joints also appear to be functioning smoothly. I'm glad to hear that your kids like the robot; that brings me joy too. I hope the scorpion robot also prints and operates without any issues. If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)

(Edited)

@user_1301250370

This worked great! Thank you! I did however break one of the parts while trying to work out the bends. but it was my error "using pla" but this was very cool! Thanks man!

The designer has replied

@3DPRNS

Thank you for taking the photo, leaving a comment, and printing it! I really appreciate it. It's a shame to hear that there's a broken part while moving the joints. Thank you for being the first to provide a certification photo that you printed Hexnake. If you decide to print again next time, I hope it goes smoothly without any issues. If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)

@user_1301250370

Replying to @3DPRNS :

Yeah dude! I accidentally commented 2 times because the first time wouldn’t seem to work. I’m stoked to be the first. I’m getting some ASA so this next one will be awesome! thanks again! love the print! -Natesemipro

@s5862140

Print Profile

[3DP RNS] Hexnake_V1.0 / 0.2mm layer, 2 walls, 15% infill

Easy to priny but maby not need brim and it hard to remove brim

The designer has replied

@3DPRNS

If there is no brim, there may be problems with the joints. If there are no problems when printing without a brim, you can remove the brim setting. Thank you for the photo, comment, and print! If you haven't subscribed to my YouTube channel yet, please subscribe. Come check out my Patreon as well :)

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

[3DP RNS] Headless_V1.0

3DP RNS

913

2.9 k

[3DP RNS] Corpion_V1.0

3DP RNS

615

2 k

[3DP RNS] DNS Case_V1.0

3DP RNS

435

1.1 k

[3DP RNS] Spi_V1.0

3DP RNS

907

3.4 k