[3DP RNS] Corpion_V1.0 by 3DP RNS

3DP RNS

Toys & Games>Characters

Print Profile(5)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

Designer

7.5 h

1 plate

4.8(133)

No Brim,Joints are easy to move,0.2mm layer, 2 walls, 15% infill

6.6 h

1 plate

4.8(16)

No Brim,Joints are easy to move,0.02mm layer, 2 walls, 15% infill

2.9 h

1 plate

4.7(27)

one color + scaled for a1 mini

3.1 h

1 plate

4.4(16)

Click to see more

Open in Bambu Studio

Boost

937

1537

412

114

2.9 k

1.6 k

Released

Description

[3DP RNS] Corpion V1.0 (3D Printed Robot)

Series : 8 or more Legs / Scorpion Type [Youtube Video]
This Is an all at once print. Assembly not required :)
If you subscribe to the YouTube channel [3DP RNS], ★ a new robot will be revealed.
Thank you for your subscribing! It means a lot to me :)
Commercial License [Patreon]

※ Notice
For my uploaded robot model to enable all joints to move, it's advisable to use a Brim.
If removing Brim is inconvenient or challenging, I don't recommend printing it.
Also, joint functionality may vary depending on the printer and filament you use.
This robot may be complex in shape, making it difficult to print.

However, I believe it will be a robot that can satisfy you.

Comment & Rating (412)

@MBY_Prints

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

Turned out great!

The designer has replied

@3DPRNS

Your print is perfect! The robot color is also sophisticated. Are the two dots on the face eyes? You added them. They fit well. You took the picture beautifully. Very nice. Thank you for the photo, comment, and printing. If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)

@MBY_Prints

Thank you for the for. The two dots are eyes. My son didn't like how it didn't have eyes so I added the two dots there just to make him happy. I will subscribe to your YouTube channels. thanks again.

@alienturtle08

Boosted

Replying to @MBY_Prints :

are the eyes included in the print or are they painted?

@RalfDiedrichsen

Great design. Came out well, but not all of the joints work perfect. I used Extrudr PLA NX2 for all colors

The designer has replied

@3DPRNS

Thank you for commenting on the photo and printing it out. The pink scorpion looks unique. However, When I looked at the picture, it seemed fine, so which joint had an issue?

@RalfDiedrichsen

Replying to @3DPRNS :

Both claws. It is not a problem but moving them will cause a break. It is not pink, it is red :-) Bad lighting

@RalfDiedrichsen

Replying to @3DPRNS :

Both claws. No big issue but moving them more than shown will cause a break. It is red, not pink. Bad lighting :-)

@Toxin_Labs

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

beautiful model, unfortunately could not free all legs because of the brim which was too difficukt to remove in between legs. Maybe I did something wrong? my filament could be old

(Edited)

The designer has replied

@3DPRNS

Thank you for trying to print. Upon zooming in on the picture, it appears that your print has excessive shrinkage, and the extrusion seems uneven. Was it printed with a Bambu printer?

@Toxin_Labs

yeah, only thing that could have been was the filament which may have been old. I love your designs too much to only leave 4* though! I fixed the rating ;)

@3DPRNS

Replying to @Toxin_Labs :

Thank you very much! I'll make an effort to work harder :)

@user_1022138960

Boosted

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

this was incredible! so cool!

The designer has replied

@3DPRNS

Your robot was printed beautifully with a metallic feel. It feels realistic like a real robot. Well done! Thanks for the photos, comments, and print! If you haven't subscribed to my YouTube channel yet, please subscribe. Come check out my Patreon as well :)

@user_1022138960

Boosted

Replying to @3DPRNS :

Thanks! I will definitely subscribe!

@hawk_ml

Boosted

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

It took a bit to clean up but it's a great model.

The designer has replied

@3DPRNS

You printed the robot in exactly the same colors as I uploaded! The joints also look fine. Well done! Thank you for the photo, comment, and print! If you haven't subscribed to my YouTube channel yet, please subscribe. Come check out my Patreon as well :)

@hawk_ml

Boosted

Replying to @3DPRNS :

Yes, all the joints move fine. I had a bit of trouble with the front joint to one of the claws, I ended up holding the middle with pliers and got it loose with nothing broken. Robot scorpions always remind me of Wasteland and FNV OWB. I think these colors look great (generic black and grey, eSun Fire Engine Red).

@KlemK

Boosted

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

Printed like magic. The collections is amazing.

The designer has replied

@3DPRNS

Now it seems like you've printed out all of my robot collection. Your output always looks great. Thank you for the photos, comments, and prints.

@KlemK

Boosted

Replying to @3DPRNS :

Indeed, the Maker World robots are complete. The Patreon is next. Beware, the your robots are on the march :).

@takilara

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

awesome model!

The designer has replied

@3DPRNS

Your robot looks really cool! The joints seem to be working fine too. Thanks for sharing the picture, comment, and printing. If you haven't subscribed to my YouTube channel yet, please subscribe. Come check out my Patreon as well :)

@takilara

Replying to @3DPRNS :

yeah all the joints works. I was deliberately a bit careful on the inner joints of the claws, but they came out beautifully!

@jolon14623

Boosted

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

This thing came out pretty good profile was great incident one shot. One of the claws is a little difficult to move and I don’t wanna break it so I haven’t tried to open it yet but overall everything else moves perfectly fine well any issues whatsoever these robots seem to work a little better with matte filament for me than silky filament

The designer has replied

@3DPRNS

You've created an amazing robot. It looks like you've used fluorescent filaments. It's really cool. Thanks for the photos, comment, and printing. If you haven't subscribed to my YouTube channel yet, please subscribe. Come check out my Patreon as well :)

@hurdmcar000

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

looks really cool

The designer has replied

@3DPRNS

Wow, your robot looks awesome with a black body and yellow-orange accent colors. The joints seem to function well too. You took great photos. Well done! Thanks for sharing the photos, comment, and printing. If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)

@hurdmcar000

Replying to @3DPRNS :

will do!!

@TSTech

Boosted

Print Profile

[3DP RNS] Corpion_V1.0 / 0.2mm layer, 2 walls, 15% infill

I love all of these prints

The designer has replied

@3DPRNS

Oh, you printed the Corpion beautifully. The clean combination of white body with blue and black accent colors looks really cool. The joints seem to be working smoothly without any issues. Thank you for the picture, comment, and printing.

@TSTech

Boosted

Replying to @3DPRNS :

I've been slowly printing all of em, My daughter loves them

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Sword, Shield & Spear Compatible W/ 3DP RNS Worker

175

3DP-RNS Pistol

KPrints

Print Profile(5)

Description

Comment & Rating (412)

License

Related Models

Sword, Shield & Spear Compatible W/ 3DP RNS Worker

Hexagun - Weapons Compatible With 3DP RNS Worker

[3DP RNS] Strider V1.0

3DP-RNS Pistol