Formula 1 Race Car

----

I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display.

Final Size is 150x100mm

If you resize the model from 150 x 100 make sure you do NOT scale the Z axis or the print colours will not be in the same position

— Printing Instructions---

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Sunlu Red Transmission Distance: 5
PLA BambuLab Basic Black Transmission Distance: 0

Swap Instructions:
Start with Jade White
At layer #8 (0.72mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Red
At layer #21 (1.76mm) swap to Black for the rest.