Print Profile(3)
No hole - PETG - 0.2mm layer, 2 walls, 15% infill
Designer
24 min
1 plate
0.6mm line width with default 0.4mm nozzle, 0.2mm layer, 2 walls, 25% infill
24 min
1 plate
0.2mm layer, 2 walls, 15% infill
19 min
1 plate
Open in Bambu Studio
Boost
24
44
9
4
103
68
Released
Description
This is a cable management clip that is easy to clip in and out when you need to add a new cable. Just stick it with some double-sided 3M tape and you're ready to go!
Supports: No
Infill: It's mostly walls so it does not really matter
Material: PETG recommended for flexibility
Size: 20mm x 50mm
 |  |
Comment & Rating (9)
All
Print Profile
0.6mm line width with default 0.4mm nozzle, 0.2mm layer, 2 walls, 25% infill
I did modified them in Bambu studio to make them shorter and came out perfect for my need. Thanks!
0
Reply
Boosted
Simple and works great!
0
Reply
Boosted
Thank you, it really helped me with my under-table cable management. I used the version without the hole and scaled it in Z to 19mm, to fit my double-sided duck tape. Printed by P1S, on 0.28mm extra draft profile. Filament: ASA (Aurapol)
(Edited)
0
Reply
The walls are too light, but they work properly
0
Reply
Print Profile
0.6mm line width with default 0.4mm nozzle, 0.2mm layer, 2 walls, 25% infill
0
Reply
Print Profile
No hole - PETG - 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
No hole - PETG - 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.6mm line width with default 0.4mm nozzle, 0.2mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.6mm line width with default 0.4mm nozzle, 0.2mm layer, 2 walls, 25% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld