Texture Roller - Grass

Texture Roller – Grass (Seamless, Embossed)

Wind-swept blades of grass form a tight, organic weave with lively directionality. This 3D-printed roller presses a crisp, embossed pattern that wraps end-to-end with no visible join—great for nature-themed mugs, planters, trays, and full slabs.

Applications

• Ceramics & Pottery: Instant raised texture—no carving required.
• Polymer Clay & Craft Dough: Clean detail in a single pass.

Sizes

• ✅ Medium: 120 mm height × 3.8 cm diameter
• ❌ Large: 160 mm height × 6 cm diameter
• ❌ Small: 80 mm (currently unavailable—comment if you’d like it tested)

Style

• ✅ Embossed
• ✅ Seamless
• ✅ One full repeat per roll
• ❌ Debossed: Not available (yet). Comment if you’d like it.

Custom Sizing (print at your own risk)

• Scaling up → deeper grooves
• Scaling down → shallower grooves
  Medium & Large share the same designed depth—start from the closest size.

Tested Print Settings

• Layer height: 0.16 mm
• Infill: 10% Crosshatch
• Perimeters/Walls: 2 (recommended for edge fidelity)
• Raft: Not required on direct-drive; use a 3-layer raft on bedslingers (especially Large)
• Supports: None

Usage Tips

• Roll on soft/pliable clay for the sharpest edges.

• Light cornstarch dusting or a mist of water helps prevent sticking.

   

Handle

• Not included yet.