MTG Linkage Lid Deck Box - Double (print in place)
Copyright Claim
MTG Linkage Lid Deck Box - Double (print in place)
Boost
45
104
20
Print Profile(6)
80+ v1
Designer
5.6 h
1 plate
100+ v1
Designer
6.3 h
1 plate
60+ v1
Designer
5.1 h
1 plate
110+ v1
Designer
6.6 h
1 plate
Click to see more
Open in Bambu Studio
Boost
45
104
20
1
230
157
Released
Description
A double deck box; available in various sizes. Let me know if you need a different size and I can add it.
The number refers to the number of double sleeved cards that will fit. If you want the single sleeve count, multiply that number by 1.25. (The 80+ will fit a single sleeved commander deck).
Print Settings
The model is designed to be printed with 0.4mm nozzle, 0.2mm layer height and no supports.
I recommend to printing with 2-3 walls and 15%+ infill for good strength. It's also best to use a brim to help the lid adhere to the bed.
The arms should probably be printed with even more walls (5+) and infill (50%+) for better longevity.
Comment & Rating (20)
All
Print Profile
80+ v1
looks great, I tried to be "smart" and assemble it, definitely just print it in place, I cracked this one in a couple spots in the thin areas, but it popped back together
0
Reply
Print Profile
100+ v1
I had a massive layer shift pretty far into it, but that could have been caused by many things. I'm assuming it was the grid infill.
the lid won't close now but it works well enough as a desk organizer for my printing supplies!
1
Reply
SAME FOR ME WHY IS THIS HAPPENING
0
Reply
Replying to @user_3851894144
I would re-try it without grid infill :)
0
Reply
I also have a layer shift using grid infil pretty far into it. so then I guess it is the infill
0
Reply
I printed it but I can't get it closed. do I just need to force it for the first time, or will it break then?
The designer has replied
0
Reply
You do need to force it, but it shouldn't take too much force
0
Reply
Print Profile
80+ v1
Having some random issue where the lid comes loose at the same layer each time for all the boxes. I've tried glue and a brim, just can't get it to stay.
0
Reply
Print Profile
100+ v1
its really great!, i have printet it scale 50% and still works( 0,4 nozzle) :D ty
0
Reply
Print Profile
100+ v1
Worked great!
0
Reply
Print Profile
100+ v1
Great print-in-place product!
0
Reply
Print Profile
100+ v1
It did not print correctly, i ended up throwing it away.
0
Reply
worked great
0
Reply
Print Profile
80+ v1
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld