MTG Linkage Lid Deck Box - Single (print in place)
Copyright Claim
MTG Linkage Lid Deck Box - Single (print in place)
Boost
49
103
21
Print Profile(9)
110+ v1
Designer
4.5 h
1 plate
60+ v1
Designer
3.8 h
1 plate
80+ v1
Designer
4.1 h
1 plate
100+ v1
Designer
4.3 h
1 plate
Click to see more
Open in Bambu Studio
Boost
49
103
21
3
255
177
Released
Description
A deck box; available in various sizes. Let me know if you need a different size and I can add it.
The number refers to the number of double sleeved cards that will fit. If you want the single sleeve count, multiply that number by 1.25. (The 80+ will fit a single sleeved commander deck).
Print Settings
The model is designed to be printed with 0.4mm nozzle, 0.2mm layer height and no supports.
I recommend to printing with 2-3 walls and 15%+ infill for good strength. It's also best to use a brim to help the lid adhere to the bed.
The arms should probably be printed with even more walls (5+) and infill (50%+) for better longevity.
Comment & Rating (21)
All
Print Profile
80+ v1
nice design but does not print with default settings (lid fails due)
The designer has replied
0
Reply
Sorry, it failed for you.
I've had quite a few successful prints myself. The only difference is that I tend to print with a brim for better bed adhesion. I'm guessing the lid came lose on the bed which is what made it fail for you. I didn't include the brim in the print profile as I know a lot of people don't like them. I guess I should add it regardless. Again, I'm sorry for the failure.
0
Reply
Print Profile
80+ v1
holds up well to a shake test!
0
Reply
Boosted
Print Profile
80+ v1
works great i did the recommended stuff via the description. fits a 100 single sleeved for commander (the 80+ model) but some of my decks use a lot of token cards and I couldn't fit a whole lot in there but there is space for a few tokens
0
Reply
printing my first 100 double sleeve in two colors, and added the name of the commander on top.
so excited! (Ive printed like 25 so far)
0
Reply
Print Profile
60+ v1
Modell hat sich leider bei der Hälfte um einige Millimeter versetzt
0
Reply
Printed 80+ V1 and had 2 failed prints. Used the profile as it was for the first and added a third wall for the second. Neither successfully printed the lower arms.
0
Reply
Print Profile
60+ v1
A little hard to open this box. Still usable though.
0
Reply
Print Profile
80+ v1
ich habe zwei Größen gedruckt. Die Modelle sind recht hübsch, nur der Mechanismus ist am Anfang etwas hakelig.
0
Reply
Print Profile
110+ v1
prints great, needs 3 wall loops though, not 2. it's fine but, don't get me wrong but the internal structure is visible on the outside if you use 2 walls. particularly with dark filliament
0
Reply
Print Profile
110+ v1
fits over 110 double sleeved cards. a bit big but works.
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld