Intex 90 degree outlet by formentini.federico

formentini.federico

Hobby & DIY>Other Hobby & DIY

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 15% infill

Designer

40 min

1 plate

4.7(11)

Open in Bambu Studio

Boost

Released

Description

Improve the water flow inside your Intex above-ground pool with this simple snap-on nozzle!

Since Intex's stock outlet can rotate but is not able to create an optimal current inside the pool, i designed this simple adapter to redirect the filtered water along the pool's liner and make it circulate during filtration.

This tool can be easily installed on the Intex outlet, just push it into the nozzle gently until it snaps in place.

Be careful not to bend the lips too much, or they might break!

I chose to use White PETG to print since it is flexible and more resistant than PLA. Before installing for the first time, i decided to sand the edges of the print, to avoid any injury cause by any sharp edge.

Comment & Rating (12)

@brian59

Works great. Printed with PETG. It gets my whole pool swirling clockwise after a few minutes. I put a screen on the side of the pool ladder that catches any material in the water as it passes by. This is keeping the pool very clean.

(Edited)

@grokzol

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Super Druck, passt perfekt! Danke

@Sep1990

Print Profile

0.2mm layer, 3 walls, 15% infill

nice print worked perfect.

@markkleckner

Print Profile

0.2mm layer, 3 walls, 15% infill

Love the idea, but part fractured immediately when trying to install. Suggestions: Needs more internal wall thickness, and a radius at that step (seems like a stress riser).