Halloween pumpkin with print in place feet that drop down when picked up.

V1 is a update of the original with a wider flange to keep the legs from falling out, the legs and feet are the same, the original version has been fixed.

Eyes are open for maybe a future idea, mouth is closed so no supports are needed :)

one has a hole to be hung the other doesnt.

all done on tinkercad pretty happy with how it turned out.

Any tips are appreciated :)

I have not tried printing it upscaled if anyone does I would like to see how it turned out! :)

enjoy.

Print Settings

Printer:

Voxelab Aquila X2

Rafts:

No

Supports:

No

Resolution:

.2 or .3

Infill:

20%

Filament brand:

esun

Filament color:

orange

Filament material:

pla plus

Notes:

print with 1.6mm thick walls and 1.6mm top.

i recommend printing infill to make legs stronger, 20 percent works fine.

4 hour print at 50 mms at .3 layer height.

V2 has been added for people having trouble with the legs on original not staying inside the body. have added socks onto legs, have made the legs tiny bit smaller which has aloud me to create a smaller position hole so legs no longer fall out :)

I have had no problem with original but others has stated legs fall out of body this has no been fixed.

all models are ready to be printed.

if legs do no come out when off the build plate its due to the bridging of the top where the cylinders that hold the legs in place meets the top a quick twist or pull will free them up (I am working on that issue at the moment). I have done countless test prints of model after model and not one has failed on me.