This is an other holder for a WLED stripe facing the LEDs and the light inwards. The light can shine through the backside of your Skadis.
I found the basic idea in this Youtube video. All credits to him. Thanks for this Project. I redesigned this project for WLED stripes. Just use my 3D files to fit it to your Skadis.
Don‘t forget to like, push the heart and spread love to the world. Feel free to comment, i like feedback from you!
There will come a new and final version with further improvements, so this is still work in progress.
Further upcoming features:
-Guidance for 3D printed diffusor.
-Connecting system to fit all 3D printed parts to one frame.
-Last Corner with cable management
CHECK THE VIDEO FIRST TO GET THE IDEA HOW IT WORKS.
Description:
First of all you need Skadis Boards. I used 4 x 56cm x 56cm boards shown in the pictures. The facing of the LEDS is like in the video. You also need double sided tape to attach the 3D printed parts to the board. The fitting is tight but it schould work fine.
It is very IMPORTANT that you DO NOT insert the WLED stripe from above into the model. You have to insert the LED stripe from the side into the 3D printed parts!
The Basic components:
I printed:
16 x WLED Schiene V1
4 x WLED Schiene kurz
3 x WLED Kurve
1 x WLED Corner for powercable (work in progress)
For my 4 Skadis Board I need
5m WLED
https://www.amazon.de/dp/B01CDTEG1O?psc=1&ref=ppx_yo2ov_dt_b_product_details
NodeMCU or other ESP Device
https://www.amazon.de/gp/product/B06Y1ZPNMS/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&th=1
Power Supply:
https://www.amazon.de/gp/product/B078B5BWDF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
3M double-sided adhesive tape or other
Advise. This project is on your own risk, because you work with electronic parts which can be dangerous for you, if you do not know how to use.