Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Tough Cream White Transmission Distance: 10
PLA Sunlu Meta yellow Transmission Distance: 10
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Cream White
At layer #18 (1.52mm) swap to yellow for the rest.