Simple, easy-to-assemble, and connectable boxes for pills or anything else you may need

The smallest combination you can put together is 2x2, and the largest can be any size, depending on your preferences. In the parts folder, you will find the building blocks individually. Print as many as you need and then assemble them. You definitely need 4 corners, the rest depends on your needs.

Open the file 3x3-box.3mf, and you can duplicate the blocks and assemble the print set on the printer bed. Printing this file or the 3x3-box.stl file as is will give you a 3x3 box, but consider it more as a sample; customize it according to your needs.

Assembly

After you have printed the required parts, join them together. First, connect the rows, and then join the rows together.

Customization

If you want boxes of different sizes or the clearance is not right, you can find the OpenSCAD files in the upload.

The Box.scad is the main file, and next to it, you will find all 9 building blocks. These can be opened independently (with common.scad). Edit the common.scad file to customize the container; here, you can adjust the tolerance, height (global_height), and the internal size of the box (cube_size). It is not recommended to change anything else in the files.

Please refrain from scaling the STL file, as it may cause the parts to not fit properly.