Dragon Layered wall decor, cake topper, decoration

Can be increased in size using the X and Y (It is recommended that the z height stay at .18 to .20)

Print Time abt 2 hrs 20 min

P1P/ Bambu Basic
Aux fan is OFF (if using one)

Settings
First Layer .2mm
Other layers .18mm
Classic walls
2 wall loops
5 top shell
5 bottom shell
20% Gyroid infill

Prime tower enabled
Brim/Bed Adhesion: None Needed
Flushing set for .75 (you will need to adjust this for your filaments and machine type)