Deadpool Valentine that I printed for my niece.

I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display.

Final Size is 100x100mm

If you resize the model from 100 x 100 make sure you do NOT scale the Z axis or the print colours will not be in the same position

If you would like to print a frame for it, i have a design here:

https://makerworld.com/en/models/173529#profileId-190693

I have designed a box to hold 100x100 or 100x150 sized prints that I make here:

https://makerworld.com/en/models/182399#profileId-200917

Please post a picture of your printed copy! I'd love to see it!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0
PLA Overture Red Transmission Distance: 4.8
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Overture White Transmission Distance: 4.4

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #18 (1.52mm) swap to Blue Gray
At layer #23 (1.92mm) swap to White for the rest.