Spaceballs the HueForge
I have one AMS and just map colors 5 and 6 to use AMS slots 1 and 2. I leave slot 4 empty at the start the the print so it pauses when it gets to color 4. I then swap in colors 5 and 6 into slots 1 and 2, add color 4 into slot 4 and resume the print.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
If you want to scale it, uncheck uniform scale and leave the z scale at 100% so the height does not change.
Filaments Used:
PLA Black
PLA Blue
PLA Light Blue
PLA Latte Brown
PLA Yellow
PLA White
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #10 (0.88mm) swap to Light Blue
At layer #12 (1.04mm) swap to Latte Brown
At layer #16 (1.36mm) swap to Yellow
At layer #18 (1.52mm) swap to White for the rest.