CNC Table Plugs

These CNC table plugs (zaślepki do stołu CNC) are designed to keep your spoilboard / T-track table holes clean and free from dust, chips, and debris during machining.

If you have a CNC router or milling table with multiple holes, you know how fast they fill up with sawdust, metal chips, or even small screws. These plugs are a simple, 3D-printed solution to protect your table and keep your work area organized.

Snap-fit design – easy to insert and remove by hand

Print-in-place – no assembly required

Reusable & durable – PLA, PETG or ABS work well

                                        🖨 Print Settings

Recommended material: PETG (heat and wear resistant) or PLA for general use

Layer height: 0.2 mm

Infill: 15–25% is enough (higher infill = more durable)

Supports: Not required

Nozzle: 0.4 mm (standard)

TIP: If your holes are slightly tight/loose, you can scale the model in your slicer by ±1–2% for a perfect fit.

                                        ⚙ Compatibility 

Tested on [podaj nazwę swojego stołu / modelu CNC], but works with any table with similar holes.
Simply measure your table hole diameter and scale if necessary.

                                        💡 Why Use These Plugs?

Keep dust and chips away from threaded inserts

Prevent small parts from falling into the table holes

Improve workshop cleanliness

Quick install / remove — no tools needed