dragon 3

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.09mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue
    At layer #11 (0.96mm) swap to Blue Gray
    At layer #16 (1.36mm) swap to Jade White for the rest.

You can scale the x, y axis, but do not scale the z axis otherwise the color blend will be off. 

Do not simplify image.

Feel free to change colors as you like and experiment with your own visions.

Any likes, comments, or suggestions will help greatly. Happy printing!!

( If you enjoy the model, a Boost would be greatly appreciated)