Desiccant Drying Basket with Spout For eSun / Sunlu and other dry boxes
Copyright Claim
Desiccant Drying Basket with Spout For eSun / Sunlu and other dry boxes
Boost
67
156
29
Print Profile(2)
0.2mm layer, 3 walls, 15% infill
Designer
4.1 h
1 plate
A1 Mini PETG
10.7 h
1 plate
Open in Bambu Studio
Boost
67
156
29
0
198
132
Released
Description
Easy to pour desiccant drying basket with spout
fits most dry boxes
Can also be put in your AMS
Comment & Rating (29)
All
Print Profile
0.2mm layer, 3 walls, 15% infill
Printed nicely but shifted while drying and rolled against the heater. Melted to the sensor tape and caused some minor damage to the S2.
(Edited)
The designer has replied
0
Reply
oh no! that is the first I heard of that happening. did it touch the back or bottom of the plate? could you take a picture of the position when it fell off so I can see what I can do in a future update so it doesn’t happen to anyone else?
0
Reply
Replying to @Biochem
Hard to get a good picture, but here it is. .It can roll forward and the nose pushed against the heater. Maybe a small arch where it sits on each roller so that it can't move back and forth.
0
Reply
Replying to @user_399792989
that is perfect. I understand the problem. I had thought about arching the bottom but then it wouldn't sit flat on a table. maybe making little indentations for the rollers to sit in
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
printed in ABS with no issues.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
came out okay. printed in ASA. I didn’t care about different layertime so I have some issues in the surface. buts it’s functional anyway
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
perfecto para desecar
1
Reply
Very nice design, thank you.
1
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
super merci
1
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Sehr schöner Druck. Ich habe es in ASA gedruckt.
1
Reply
needs a lid
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
good petg print
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
1
Reply
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld