BentoBox V2.0 w/ push button

Remixed by

BentoBox V2.0 w/ push button

Remixed by
Boost
9
14
0

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
3.4 h
3 plates

Boost
9
14
0
0
16
2
Released

Description

==========中文==========

 

修改:
1. 增加理线槽(基于technerd和chrisax212的remix)
https://makerworld.com/zh/models/100794
https://makerworld.com/zh/models/48367
2. fan case增加按钮开关

 

盘1: 测试块, 与原作相同, 未作修改
盘2: 修改后的模型
盘3: 测试用模型

 

*重要:

stl和3mf文件中的尺寸是原作者thrutheframe设计图的原始尺寸(fan case尺寸为52.8 x 112.8 x 34.6)
由于我用ABS打印, 考虑冷却收缩补偿, 我的实际打印尺寸为100.50%
建议先打印盘1, 再对尺寸进行补偿

 

BOM:

按钮开关: PBS-10C-2 / PBS-110(开孔7毫米)
风扇: 只支持4020
我发现每个开关都有细微差异, 安装空间非常极限, 因此建议先打印盘3进行安装测试, 节省时间和耗材

 

==========ENGLISH==========

 

Modification:
1. Add wire management trough (based on remix of technerd and chrisax212)
https://makerworld.com/zh/models/100794
https://makerworld.com/zh/models/48367
2. Add push button switch to fan case

 

Plate 1: Test block, same as original work, no modifications
Plate 2: Modified model
Plate 3: Model for testing

 

*IMPORTANT:

The dimensions in the stl and 3mf files are the original dimensions of the thrusteframe's design (fan case dimensions are 52.8 x 112.8 x 34.6)
Since I print with ABS, considering cooling shrinkage compensation, my actual printing size is 100.50%
It is recommended to print plate 1 first and then compensate for the size.

 

BOM:

Push button: PBS-10C-2 / PBS-110 (mounting hole 7mm)
Fan: only supports 4020
I found that each switch has slight differences, and the installation space is very limited, so it is recommended to print plate 3 first for installation testing to save time and filaments.
 

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more