P1S Storage System by Big-Daddy

Big-Daddy

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

23.8 h

4 plates

4.8(32)

0.2mm layer, 2 walls, 15% infill, Multicolour

24.4 h

4 plates

4.8(6)

Open in Bambu Studio

Boost

314

537

598

399

Released

Description

This is my version of a P1S storage looks like the actual printer down to that basic screen (we all love) has 6 drawers with supportless handles.

the top under the lid is 29mm deep, 129mm wide, 140mm long, the 2 drawers inner diameter is 54.5mm, tall 137.5mm, 40.17mm wide the 2 middle drawers are 22.38mm tall, 137.5mm long, 54.5mm wide the bottom 2 drawers are 22.7mm tall, 137.5mm long, and 116.5 wide at it present scale. 2pcs. need support the handle knob for the top lid (glass plate) and the top of the main body where the top lid goes on there is a set of 4 feet you can print in PLA or TPU you can pop on the bottom. The P1P version is in the raw files. Happy printing and thanks for looking.

For the X1C version

https://makerworld.com/en/models/180224#profileId-198257

Comment & Rating (67)

@MitchellCheng

Hey! Love this, It's currently still printing but I just wanted to say that from the RAW files, the lid does not fit snuggly.

The designer has replied

@Big.Daddy.

I can increase it a little more was worried if someone's printer not dialed in

@Big.Daddy.

and could print it at 101% on the y axes that's where I shrunk it a little just to be safe.

@Big.Daddy.

also add a tight lid in the raw files top lid (2)

@SrwProduction

Print Profile

0.2mm layer, 2 walls, 15% infill

Super nice model with no problems

The designer has replied

@Big.Daddy.

Thanks looks great glad you liked it

@Big.Daddy.

they look good glad you liked the model Thanks

@dosandros

Print Profile

0.2mm layer, 2 walls, 15% infill

looks perfekt i think i will print more of them but without ironing and with PLA matte its better

The designer has replied

@Big.Daddy.

looks great thanks for sharing the picture

@ASavagePlatypus

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Came out perfect! Thanks!

The designer has replied

@Big.Daddy.

looks great thanks for rating and pictures glad you liked the model

@300374

Print Profile

0.2mm layer, 2 walls, 15% infill

passt perfekt zusammen. Klasse Arbeit

The designer has replied

@Big.Daddy.

Das sieht toll aus. Ich freue mich, dass dir das Modell gefällt Danke

@Turktrucker

thank you

The designer has replied

@Big.Daddy.

Thank you glad you liked it

@vk5fadl_bigkev

Print Profile

0.2mm layer, 2 walls, 15% infill

come out great worth the print love it.. thanks

@doreeneichhorn

Print Profile

0.2mm layer, 2 walls, 15% infill, Multicolour

Perfekt *****

@mountainmed7

Print Profile

0.2mm layer, 2 walls, 15% infill

Printing with PETG. Was printing fine and then I noticed runs on the side below logos. Then a bunch of spaghetti, then pieces of top had fallen off. not sure what went wrong

(Edited)

Other Issues:Used generic PETG profile on Bambu studio

The designer has replied

@Big.Daddy.

looks like started to clog are got wet since went from flat color to shiny color I printed all mine in PLA sorry you hade an issue with petg it looks like a lot of ghosting at the logo too but it could be just the picture angle

@diehls3d

Print Profile

0.2mm layer, 2 walls, 15% infill, Multicolour

My mom ADORES this LOL! Very clean my mom had to resize the bins a little so they would fit nicely, I believe but overall they came out nice and well made! It’s very cute! Thanks so much for the print!