created with filament painting technique using hueforge software.
Remember if you want to scale, do it only with x and y axis, z must be the same as original.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions: if you don't have ams just put pause on specified layers and swap filamen manually
Start with Black
Start with Black
At layer #6 (0.56mm) swap to Beige
At layer #17 (1.44mm) swap to Ivory White for the rest.