Post -It Note Dispenser

Features:

• Simple click together design
• 3D printed spring to keep tension on the notes
• Designed for Z notes (Alternating glue strip)
• Holds one full stack of post it notes
• A nice useful addition to any desk!

Assembly:

1. Insert the spring inside the base using a small amount of superglue to permanently hold it in place. (There is a recess for correct positioning of the spring)
2. Add one full stack of Z notes on top of the spring
3. Poke the first note through the slot int he lid
4. Clip in the lid starting with the side that has 3 tabs
5. Place one thumb on each of the arrows de-bossed into the base and gently squeeze
6. Whilst still squeezing, clip the side of the lid with 2 tabs into place with a satisfying ‘snap’

Opening:

1. Place one thumb on one de-bossed arrow and gently squeeze to release the retaining tab
2. Repeat this on the other de-bossed arrow
3. Remove and replace the stack of Z notes

Link to the correct post it notes:

https://www.amazon.co.uk/Post-R330NR-Z-Notes-Rainbow-Sheets/dp/B000I5ZJ4E

Thanks for looking!

Please rate and review your printing experience :)