Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Tough Vermilion Red Transmission Distance: 3
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Vermilion Red
At layer #16 (1.36mm) swap to Silver
At layer #22 (1.84mm) swap to Ivory White for the rest.