Hockey / Sports Goal Light Lamp (Compatible with Lamp Kit 001) by Biochem

Biochem

Household>Decor

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

8.2 h

6 plates

5.0(16)

Open in Bambu Studio

Boost

175

245

197

227

Released

Description

No AMS needed

Sports Goal Light

Compatible with Bambu's LED lamp kit 001

Optional extra base if using a different light

Easy click and twist assembly

No glue or screws needed

Step 1 - Click the cage together

Step 2- Put cage in base

Step 3 - Put red lamp cover in through base and twist to lock in place

Step 4 - Add light to bottom cover

Step 5 - Screw bottom cover into base

Comment & Rating (20)

@Mitch23

Print Profile

0.2mm layer, 2 walls, 15% infill

excellent model printed very easily and the finished result looks great. I did have some challenges with assembly trying to get everything to fit together but eventually it went together fine and I highly recommend this.

The designer has replied

@Biochem

glad you like it! it looks like the bottom of the cage isn’t snapped in properly. they look bent inwards. try to push them out and they should lock into place with the base. that could have been your issue.

@Biochem

Replying to @Biochem :

like this

@User.Project.3D

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice STL, congratulations keep it up. Good work

The designer has replied

@Biochem

thanks! looks great! if you are using the Bambu led kit, you should be able to put the usb cable through one of those bottom squares and the bottom will screw up higher

(Edited)

@marekzeman91

Print Profile

0.2mm layer, 2 walls, 15% infill

Very cool model.

The designer has replied

@Biochem

thanks!

@mazze

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

printed with bambu black PLA and Sunlu transparent PETG

(Edited)

@Jannik98

Print Profile

0.2mm layer, 2 walls, 15% infill

nice

@livingston.k.co

Print Profile

0.2mm layer, 2 walls, 15% infill

wow this is cool! red light district 😂

@BaSch

Print Profile

0.2mm layer, 2 walls, 15% infill

@Zipfel

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

@adzamper7117

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@Francesco_13

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.