Geisha impresa en 3d, creada por IA y usando programa Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Gray
At layer #11 (0.96mm) swap to Silver
At layer #15 (1.28mm) swap to Jade White for the rest.