Timber Birdhouse - Tree Swallow

Festavius
Household>Garden
Copyright Claim

Timber Birdhouse - Tree Swallow

Festavius
Boost
56
101
38

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
0.2mm layer, 2 walls, 10% infill
0.2mm layer, 2 walls, 10% infill
Designer
16.2 h
2 plates
5.0(14)
Updated profile 0.2mm layer, 2 walls, 10% infill
Updated profile 0.2mm layer, 2 walls, 10% infill
Designer
16.2 h
2 plates
5.0(1)
Open in Bambu Studio
Boost
56
101
38
13
161
101
Released

Description

*Note - a new profile was added to support Bambu Studio v1.9.1.67 - this version will not print tree supports as required in the older print profile without setting them to Hybrid Also enable Brim.

 

Well vented and easy to clean tree swallow bird house. When attached the roof will stay firmly in place and provide excellent shelter and air flow through the peak, eaves, and drainage holes in floor. The roof detaches by prying slightly on the eaves and pulling up.

Recommend printing in a natural colors, and UV coat with Krylon if using PLA. Infill is used to provide insulation with additional added in the peak to support repeated removals.

bird house
tree swallow bird house

Comment & Rating (38)

Please fill in your opinion
(0/5000)
level
@StevieJ
Print Profile
0.2mm layer, 2 walls, 10% infill
Nice print! I used ASA for the roof - due to it's UV rating and had to scale down to 85% with what I had left - still a really nice size. I used the negative part adder in the Bambu slicer to get the hole to 1.5" diameter (based on what I read for a tree sparrow). Both pieces fit together nicely, and the reduced screw hole sizes were still a perfect fit for my 2" deck screws (used to mount it to a 6"x6" tree house support). Thanks for the realistic wood shingle roof design!
The designer has replied
2
Reply
level
@Festavius
Looks great and no further UV protection needed! Thank you the kind compliment and taking the time to print.
0
Reply
level
@skssks
Can you print with ASA without an enclosure? Thanks
0
Reply
level
@legozac
Boosted
I love your model so much that I made three of them. We will mount them to our fence.
The designer has replied
1
Reply
level
@Festavius
Thank you! Love the filament choices - the dual wood looks incredible!
0
Reply
level
@T3rryX
Boosted
Print Profile
Updated profile 0.2mm layer, 2 walls, 10% infill
Great Model, Printed in PETG, NO SUPPORTS oriented upright, came out flawless, will be put on a shady side of the yard so hopefully it'll be alright in the sun in a milder climate.
The designer has replied
0
Reply
level
@Festavius
PETG must give extra advantage in adhering, very nice, looks great. Thank you!
0
Reply
level
@Popzilla
Nice results, supports worked flawlessly. I need to learn how to add wooden texture like this to my models. 😀
The designer has replied
0
Reply
level
@Festavius
Thank you, looks great! I’m still learning myself. What helped was focusing on UV unwrapping and finally understanding why “quads” are so important.
(Edited)
0
Reply
level
@ontheriver
Boosted
Print Profile
0.2mm layer, 2 walls, 10% infill
Printed in ABS, so I changed the orientation of the roof as you can see in the photo and it printed with just a little bit off, no supports. Could easily fix with tree supports, but I wanted to live dangerously. I really like the functionality of this house! Venting, clean able, it's really thoughtful.
(Edited)
The designer has replied
0
Reply
level
@Festavius
Beautiful! Really like the colour, the abs makes it look like fresh painted park bench. Live dangerous I guess - the first set of rails must have given you confidence to continue. Thank you!
0
Reply
level
@andre.henkels
Boosted
Print Profile
0.2mm layer, 2 walls, 10% infill
The designer has replied
0
Reply
level
@Festavius
Nice colours! Thank you for posting and rating!
0
Reply
level
@Ssellers748
Print Profile
0.2mm layer, 2 walls, 10% infill
The designer has replied
0
Reply
level
@Festavius
The colour addition really ties it all together, looks great! Thank you for posting.
0
Reply
level
@Goldni007
this looks awesome. dumb question. I don't see anyone Mini profile. what's the best way for me to be able to do that on my mini?
The designer has replied
0
Reply
level
@Festavius
I thought it may fit if scaled down then add the appropriate entry hole size but as the roof fits when scaled down to ~94% the base needs to be scaled down way more….In order for this to print on the A1 mini it would need to be scaled down to 74% which would work as far as ornamental function but too small for most birds.
0
Reply
level
@Goldni007
Replying to @Festavius :
thank you. I'll be buying an A1 when it comes back out, so I will print your creation then. thanks for your passion and talent!
0
Reply
level
@maitiu.obrien
Boosted
Print Profile
0.2mm layer, 2 walls, 10% infill
Absolutely fantastic model!
The designer has replied
1
Reply
level
@Festavius
Thank you!
0
Reply
level
@BradTew2
Print Profile
0.2mm layer, 2 walls, 10% infill
Turned out great! Thanks!!
The designer has replied
0
Reply
level
@Festavius
Excellent, thank you!
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Birdhouse Customizable

Birdhouse Customizable

Coat Over
0
5
6
Birdhouse

Birdhouse

Frontx
0
2
2
Poop Chute Tree

Poop Chute Tree

Kenzo73
2
22
8
Birdhouse 16eme

Birdhouse 16eme

flowalistik
0
3
0
PrivacyTermsGuidelinesFAQCookie PolicyCookie Settings
© 2024 MakerWorld