FireFox - HueForge Print by cyanidesugar

cyanidesugar

Art>Other Art Models

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

Firefox 0.04mm layer, 1 walls, 100% infill

Designer

5.7 h

1 plate

5.0(8)

Open in Bambu Studio

Boost

Released

Description

A fiery fox for your HueForge print needs! Using HueForge's metallic Brightness Comp to experiment with, I think I've managed to achieve a rather natural looking fire effect around the fox.

The 3MF will have settings already preloaded for you. Otherwise, use the STL with the instructions below!

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:
- PLA BambuLab Matte Charcoal Transmission Distance: 0.6
- PLA CC3D Orange Transmission Distance: 7.4
- PLA CC3D Lemon Yellow Transmission Distance: 8
- PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
- Start with Charcoal
- At layer #7 (0.44mm) swap to Orange
- At layer #21 (1mm) swap to Lemon Yellow
- At layer #37 (1.64mm) swap to Jade White for the rest.

_______________________________________

If you'd like to support me, I now have a Patreon!

Joining will give you behind the scenes information on WIPs, access to a private discord, early access, includes models that are otherwise paid, and more!

If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!

_______________________________________

Comment & Rating (9)

@feistykitty3d

my orange seems a bit lighter, so on my second one (smaller, left in the photo) I started with three layers of red before switching to orange, which I think makes it look much better with the filaments I have. I also used glow in the dark orange (looks translucent white in light) instead of white. I changed the layer heights a bit to make sure the glow in the dark would be thick enough :)