GIF
GIF

Weekly pill dispenser


Print Profile(10)

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
X1 Carbon, P1S, P1P, X1, X1E, A13.4 h
5.0
20% bigger version 0.2mm layer, 2 walls, 15% infill
20% bigger version 0.2mm layer, 2 walls, 15% infill
Designer
X1 Carbon, P1S, P1P, X1, X1E, A15.4 h
4.6
15mm Higher 0.2mm layer, 2 walls, 15% infill
15mm Higher 0.2mm layer, 2 walls, 15% infill
Designer
X1 Carbon, P1S, P1P, X1, X1E, A13.9 h
Sample cups for size testing 0.2mm layer, 2 walls, 15% infill
Sample cups for size testing 0.2mm layer, 2 walls, 15% infill
Designer
X1 Carbon, P1S, P1P, X1, X1E, A135 min
Click to see more

291
423
98
643
894
Released
Copyright Claim
Model
Comment & Rating
Remixes
Related Models

Model

 

I've found a solution to easily find a tablet when you're still quite sleepy.

When I saw the challenge I thought I should make something easy to put together. 
Now I won't have to look for pills anymore and they will be ready. 
I made a weekly pill dispenser so that it is easy to refill on Sundays.

Update:9.2.2024 added bigger version for 20%

Update: 11.2.2024 added higher for 15mm and sample cups

Update: 19.02.2024 added cover in German language 

If you want the covers in another language, please leave a comment and I will prepare it for you.

Below is a picture of how easy it is to assemble.

Use a silica gel and insert it into the bottom slot so the tablets stay dry.

 


License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Comment & Rating (98)

0/5000

0.2mm layer, 2 walls, 15% infill

came out great except for the support in the dispenser area. I believe that was due to my aux fan and the filaments being used (white PETG, black cf-PLA, pink matte PLA) even with the supports failing it still printed and functions well! thank you also a bigger version for large pills would be great! (Edited)

The designer has replied
1
Reply

I added the support because the bridge is in the radius and pulls the thread straight. I see you have used two different materials, how do they stick together. It's best to print with PLA and use PETG for the support rather than both in the same model. Thank you for the 5 stars. (Edited)

1
Reply

I have made a bigger version by about 20%, but if you want to make it even bigger you can increase it by 20%. (Edited)

1
Reply

@Rober7Crow that’s my problem I just didn’t have any white PLA and wanted these colors 😊they did stick together and functions in the version I printed but yes the support works well it was just materials and my settings that caused a problem (Edited)

2
Reply
20% bigger version 0.2mm layer, 2 walls, 15% infill

printed perfectly on my p1s.. I made the 20% bigger one and glad I did… prob is about 4-5 inches round.. I used red Bambu abs for the base with a black stripe and silver tray pcs … 10/10

The designer has replied
0
Reply

nice, thanks for 5 stars :)(Edited)

1
Reply

one thing I did notice when I went to assemble… the lid didn’t have a indent for the handle lip to fit into.. I had to sand the lip off the handle and just glue it to the lid.. u can see the circle there, but it’s not recessed

0
Reply

@B&B Wraps - The Wrap Guy you probably haven't noticed the support in the circle that needs to be uprooted

0
Reply
20% bigger version 0.2mm layer, 2 walls, 15% infill

It printed super easy, and everything went together well. No problems with the print. Works well!

The designer has replied
0
Reply

Thanks for that nice comments :)

0
Reply
0.2mm layer, 2 walls, 15% infill

Love this pill dispenser. Finally one big enough to hold my meds and “horse pill” vitamins

The designer has replied
0
Reply

Glad to hear that, thanks for such a nice comment 😉

0
Reply
A1 Mini Friendly 0.2mm layer, 2 walls, 15% infill

sehr schöner druck

0
Reply

Thank you for the positive feeling :)

0
Reply
Model Comment

Love it! Added letters in the slicer. Thank You

The designer has replied
0
Reply
Model Uploader

Woow,it's really beautiful, thank you for sharing it with me :)

0
Reply
0.2mm layer, 2 walls, 15% infill

This was such a neat design and model that I couldn’t wait to print it. it’ll be a great gift for some family members!

The designer has replied
0
Reply

Thank you for the 5 stars and may they be grateful for the gift :)

0
Reply
Model Comment

Turned out great!

0
Reply
0.2mm layer, 2 walls, 15% infill

Great stl.

0
Reply
0.2mm layer, 2 walls, 15% infill

Printed perfect! Used the AMS with 2 color printing

0
Reply

Remixes (0)

There are no remixes yet