Bambu Lab P1P/P1S/X1C 18650 Portable Display (xTouch)
Copyright Claim
Bambu Lab P1P/P1S/X1C 18650 Portable Display (xTouch)
Boost
117
202
37
Print Profile(2)
0.2mm layer, 2 walls, 30% infill
Designer
1.9 h
1 plate
0.6mm_PETG-CF_ nozzle, 0.18mm layer, 2 walls, 20% infill
4.7 h
5 plates
Boost
117
202
37
1
196
106
Released
Description
Used parts:
- 5V BMS with dimensions: 17,2 x 28 mm https://pl.aliexpress.com/item/4001196670805.html
- 18650 x2 case with dimensions: 78 x 41 x 21 mm https://pl.aliexpress.com/item/1005002482317489.html
- ON/OFF mini switch with mounting dimensions: 13 x 8 mm https://pl.aliexpress.com/item/32976435586.html
- 4 x countersunk screw M3 x 32 mm
- JST 4P cable
Comment & Rating (37)
All
my display is light flickering how can I fix this ?
0
Reply
Not for this specific project, but I was getting the same flicker issue, on two completely different screens. I tried a different USB cable to power the board/screen, and this seems to have helped for some reason.
(Edited)0
Reply
Replying to @Allan_S
the battery gives only 3.7v output and under 4.3v display will flicker. i used a dc boost up tha will fix this
1
Reply
Replying to @tripex80
what kind of dc boost? ok so I found dc - dc 5v boost but how to connect it correctly? just before screen?
(Edited)0
Reply
Hello, I haven’t been able to find M3 screws with a countersunk head and a size of 32 mm anywhere for a whole week now (everywhere they answer that M3 screws don’t exist in this size). Please tell me if you could remake the model for common m3 size screws with a length of 30 or 35 mm. Thank you
The designer has replied
0
Reply
Here you can find 32mm screws: https://a.aliexpress.com/_EvzP9ar
1
Reply
Replying to @Szaman
Thanks, i order this. Is it right?
0
Reply
Replying to @user_469467530
Yep
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
0
Reply
why does it need 2 18650 batteries? It won't run on one?
0
Reply
sure, for half the time.
0
Reply
Can you also upload the moldel of the botton base?
tnk.
The designer has replied
0
Reply
It's uploaded in RAW files section.
0
Reply
Link to the model for the stand?
The designer has replied
0
Reply
In raw files.
0
Reply
Hi
Very nice design, do you have some wiring pictures or some more information how to wire this?
Thanks in advance
The designer has replied
0
Reply
Added unprofessional scheme to images ;)
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
well done
1
Reply
Good idea. I have to buy one myself. Seems to be a solid option.
1
Reply
Thanks , printing now. What are you seeing for battery life? day? days? week? only hours?
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Related Models
© 2024 MakerWorld