Halloween Clock - Customizable

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

Ready for Halloween? This clock makes a great ghoulsome complement to your decor. Ghosts among a foggy cemetery entrance await you along a pumpkin pathway up to haunted mansion on top of a hill under a full moon light as bats swirl among the eerie sky.

Clock numbers are embedded onto the clock.

Customize your clock. All clocks are wall mountable. The mini clock has a magnet option also. You have the options of the clock size, use of a bezel, hour color accents, clock hands, and a stand. Color them how you see fit. This section, you will choose the clock face to make your clock. 

The clocks have 2 sizes, Large(246mm) and Mini(170mm), and an option with or without a Bezel. The clock face without the bezel is the full 246mm(Large) and 170mm(Mini). While the one with the bezel is 234mm(Large) and 158mm(Mini) to accommodate the difference for the 6mm bezel interface. Some faces have an added option of regular numbers and roman numerals. Pictured below are some samples.

1. Large Clock Full Face no Bezel: 246mm
2. Large Clock with Bezel Usage: 234mm
3. Mini Clock Full Face no Bezel: 170mm
4. Mini Clock with Bezel Usage: 158mm

Below are links to the clock parts for their respective sizes and the clock hands if needed:

Large: https://makerworld.com/en/models/1220826-clock-large-wall-mount-or-with-display-stand#profileId-1237665

Mini: https://makerworld.com/en/models/1220990-clock-mini-wall-mount-magnets-or-display-stand#profileId-1237871

Clock Hands: https://makerworld.com/en/models/1221053-clock-hands#profileId-1238638

More clock faces can be found at my Clocks Collection: https://makerworld.com/en/collections/5469420-clocks

Halloween Clock

Clock Shown is a Large Clock with Bezel (234mm Clock Face)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Blue Gray Transmission Distance: 3 (Dark Gray acceptable replacement)

PLA BambuLab Basic Jade White Transmission Distance: 4.6

PLA BambuLab Basic Orange Transmission Distance: 7

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer (0.88mm) swap to Blue Gray (Dark Gray acceptable replacement)

At layer (1.04mm) swap to Jade White

At layer (1.2mm) swap to Black

At layer (1.28mm) swap to Orange for the rest.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away. 

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections