AMS Filament Guide by lou.cifer

lou.cifer

3D Printer>3D Printer Accessories

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

PLA 0.12mm layer, 3 walls, 15% infill

Designer

51 min

1 plate

4.4(25)

0.2mm layer, 2 walls, 15% infill

28 min

1 plate

4.3(3)

Boost

110

472

279

Released

Description

Its a simple Guide for the AMS, help to feed the Filament easyer into the AMS and Protect the Filament Rubbing.

Just Clip on and put a small piece of a PTFE Tube in it and cut it on the upper side.

Im New here, im Sorry for the Print Profile Issue. Please Print in PLA

IMPORTANT! I double-checked and tested the print profile I created. Therefore, I will only take feedback and update for those profile. Profiles created and uploaded by other has nothing to do with me and if it breaks your printer. It's on you. I do my due diligence, and so must you. That is the minimum effort an individual ought to take if they want to get into 3D printing.
Print in PLA is Recomended.
WICHTIG! Ich habe das von mir erstellte Druckprofil doppelt geprüft und getestet. Daher nehme ich nur Feedback und Updates für dieses Profil entgegen. Profile, die von anderen erstellt und hochgeladen wurden, haben nichts mit mir zu tun, und wenn es Ihren Drucker kaputt macht. Es liegt an Ihnen. Ich tue meine Sorgfaltspflicht, und das müssen Sie auch. Das ist das Minimum an Aufwand, den ein Einzelner betreiben sollte, wenn er in den 3D-Druck einsteigen will. Erst denken, dann Drucken.
Der Druck in PLA wird empfohlen.

Comment & Rating (45)

@SirPiedone

hello I have try your design and look cool bit I have a problem . maybe is my printer . can you take a look on the photos

The designer has replied

@SirPiedone

sorry but your pieces seems to brake after first try

@lou.cifer

mine comes out perfect. printet in pla i try another print and check that

(Edited)

@lou.cifer

Im so Sorry, im new here, there was a issue on the Profile. Please print with PLA. I have Correct it and hope it works now. IM very sorry that was my fail. PLA is Recomended here.

@user_2740244923

Ich habe schon viel ABS auf dem X1C gedruckt, sorry, aber das Teil ist das Schlechtestes was ich bisher gedruckt abe, bricht beim ersten Zuführen von Filament auseinander, 0 Sterne

The designer has replied

@lou.cifer

abs ist auch eine schlechte wahl, meine habe ich mit bambu pla perfekt gedruckt Einfach die einstellungen und Material wahl überarbeiten, dann klappt es. lg

@lou.cifer

Print in PLA, sorry da war ein Falsches Profil drin. Bin neu hier und kenne mich noch nich mit der Seite aus. Sollte jetzt hoffe ich behoben sein. Sorry for that issue

@lou.cifer

Wenn Sie so viel gedruckt haben wie Sie sagen, dann haben Sie auch bestimmt die Druckeistellungen und die Ausrichtung überprüft :) Sorry, aber erst denken und dann Drucken hilft manchmal :)

@ulf.janson

Print Profile

PLA 0.12mm layer, 3 walls, 15% infill

Good fitting,,, but the part touch the filament of a nearly full spool.

The designer has replied

@lou.cifer

Thx for that, i will redesign the Parts for better Fitment

@robotcrazy

Print Profile

PLA 0.12mm layer, 3 walls, 15% infill

Does the job. It works well to protect the guides underneath.

@skutny

Print Profile

PLA 0.12mm layer, 3 walls, 15% infill

I printed them in PLA PETG and ABS but the thands keep breaking off as I install them. Rotating flat makes it hard to clean support. Thank anyway, it look like a great Idea.

The designer has replied

@lou.cifer

thx for your reply. i work on a new version and test them if i finished. then i will share the new one here

@xpisoverrated

What orientation should i print in, when printing flat against the bed i get a cantilever error i assume because of the two open lines. Also should i use supports (apologies for questions, new at this)

The designer has replied

@lou.cifer

yes use Supports. i print it with 25 infill. you can print flat or upright. please disable arachne for the print. may be results are better in petg and slow speed i will work on some test prints and optimizings

@neotrax

Print Profile

PLA 0.12mm layer, 3 walls, 15% infill

très bien

@bowmanshannon

Print Profile

0.2mm layer, 2 walls, 15% infill

they were a big help. it solved my problem. the filament wore a grove where it goes in at and would over heat the motor.This solved my problem. thanks it’s a great print if have the same problem I was having.