Lamp with traditional design with easily replaceable pattern compatible with Bambulab LED KIT 001.

The lamp consists of three main parts, legs, shade, and cover. The basic design is compatible with Bambulab LED KIT 001. If you do not have LED KIT 001 you can use the E27 Bulb adapter and for this, you need to print the Bulb connector. Only use LED bulbs that do not generate heat energy!

You can use the boards with the included pattern or download the "model for your pattern" file and create your own! I recommend editing the file in STEP format because of its higher quality than STL.

The Bulb adapter can be purchased here:

- EU plug

https://www.amazon.de/-/cs/dp/B0C9ZHF6QX/ref=sr_1_2?crid=20E0N0JACSREA&keywords=E27+Bulb+Base+Adaptor+Switch&qid=1707152554&sprefix=maxmoral+1.8m+e27+bulb+base+adaptor+switch%2Caps%2C350&sr=8-2

- US plug

https://www.amazon.com/Maxmoral-Adaptor-Switch-Hanging-Converter/dp/B07GBV8QZX/ref=sr_1_2?crid=2DA1DHV0K1B3D&keywords=lamp+Bases+1.8m+Power+Cord+Cable+E27&qid=1706545231&sprefix=lamp+bases+1.8m+power+cord+cable+e27%2Caps%2C157&sr=8-2

Assembly instructions

Bambulab LED KIT 001

Bulb connector (if needed)

Pattern change

You can simply change the pattern when you get bored! Just pull out the 4 pieces you inserted and insert a new one!

Pattern board dimensions are 129.9 x 129.9 x 3.3 mm