I've created this model because the box the screws came in was flimsy and half broken.
This Gridfinity bin is 4x2x4 and was intended for M3 screws but any kind of screw can fit in there since the limiting factor is the length.
Below you can see which screws I've put in which compartment.
The table below is not readable on the mobile app. Make sure to check it in a browser if you're interested :)
M3x40 | M3x35 | M3x30 | M3x25 | M3x20 | Nuts |
M3x6 | M3x8 | M3x10 | M3x12 | M3x16 | M3x18 |
I've printed this with a 0.6mm nozzle, but I've also added a print profile for 0.4mm nozzle. I'm not sure how 0.4mm nozzle will turn out, so do let me know if you print it :)
Let me know what I can improve!