I was feed up to always had to use and find the right Allen key to be able to remove the toolhead cover. So I made this thumb screw to facilitate its removal. It's quick and easy now :)
2x M3 x 4mm SHCS - 0.77g screw included - Super glue needed
2x M3 x 6mm SHCS - 0.96g screw included - Super glue needed *
2x M3 x 8mm SHCS - 1.18g screw included - Super glue needed *
2x M3 x 6mm HHCS - 0.91g screw included *
2x M3 x 8mm HHCS - 1.15g screw included *
* Most of the thumb screw versions are interfering with the AI Camera. So I recommend you to install the M3 x 4mm SHCS version if you have a camera installed.
Material : PETG / ASA / ABS
Layer height : 0.1
Wall count : 3
min Top/bottom thickness : 0.8 mm
Infill : 30%
No Support
Extra modifications done on the toolhead
Extra modifications done on the sock
22 December 2023
Multiple screws options added
17 December 2023
First release
Enjoy this model? Your support means the world to me! If you love what I do, remember to like and rate the model. You can also follow me to get the latest updates.
If you wish to further help me to fuel future projects, consider buying me a coffee, I'm literally running on those! Every cup counts and is immensely valued.