This Pill Box;

• Hinged,
• Print in Place print - No need any assembly,
• Secured snap lid,
• has 7 Days Compartment.

Dimensions are; 70mm diameter and 25mm height. You may send a message if you want bigger or smaller size.

Print Tips:

The box will be printed less then 2h and weight is 35gr. You may use STL file for your own print profile. If you have a problem for adhesion issue for the Lid (first couple of layer is quite tricky), you can use 'Brim' option. There is one print profile that I upload.

Also, I use variable layer height. At the top, where the hinge located, the layer height is 0.08 to increase the quality of hinge function.

Hinge Design:

• It's regular hinge for print in place design.
• Every lid for each compartment has flexibility to move individually.
• There is tight tolerance (0.2 mm).

It works for my print but please let me know if you have problem on the hinge system.

Secured Snap Lid:

Generally it's easy to open. But sometimes it's hard to open due to small opening in the middle for your finger. I use bottom side of the box and put my finger from to push the lid instead of pull from top side.

There are section view and focus view for the secure feature.