This is my first attempt at creating my own hueforge.
*Quick note, I realized after creating the file that I was a bit short on Bambu Jade white, I replaced it with Creality's white, which I think is why my version came out a bit more Orange than projected in the cover photo.
**Raw file is included, please feel free to adjust settings as needed. I had success with my Bambu Lab A1 using a .2 nozzle with the included profile.

*** The raw file is a bit large, I scaled X and Y to 85%. This was still almost the entire height of the build plate. Adjust as you need, just do not adjust the Z axis.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5 **Swapped for creality white, unsure what the TD is.

Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to Red
At layer #12 (1.04mm) swap to Mandarin Orange
At layer #14 (1.2mm) swap to Jade White for the rest.

I hope you enjoy it! Please comment your creations, I'd love to see how others have this turnout!