Bambu Lab - ToolBox (M3 Edition) Remixed by TheMiguelBi

Remixed by

TheMiguelBi

Tools>Organizers

GIF

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

M3version+Accessory_0.2mm layer, 3 walls, 15% infill

Designer

10.8 h

4 plates

4.9(29)

Open in Bambu Studio

Boost

109

213

323

412

Released

Description

This is a revisitation of the "Bambu Lab - ToolBox" by torben_j.

-----------------------------
I thought I'd add some M3 metal screws and nuts,
slightly reinforced the hinges of the 2 lids, and added a bit of colour!

-----------------------------

I also created a double bottom to store the PTFE hoses of my AMS and
added 2 Hotend holder inserts and various tools for maintenance at hand!

Parts Required:
- 24 M3x8 mm screws
- M3 washer
- 24 x M3 self-locking nuts

-----------------------------

The contents of this.... in this!

Happy maintenance!
^_^

Comment & Rating (44)

@kitty_kultursch

Print Profile

M3version+Accessory_0.2mm layer, 3 walls, 15% infill

Printed in PLA, Works just fine (Now Tell me again that women and workshops don‘t Go Hand in Hand ;) ). only issue i Had: the handles of the bottom space do Not align. wished for a printing notice for mirroring or a mirrored handle on the print Plate.

The designer has replied

@TheMiguelBi

WOW! The colors are the bomb! Fantastic!! Thanks for posting this wonderful creation and mix of colors! I misaligned the two bottom handles before the official release (if you look at the photos of mine, they are still aligned). The reason is that while I was drawing them and trying to open the prototype the base was in my hand, everything seemed ok. When assembling the various parts above and obtaining the finished case, opening and closing the bottom with the handles aligned was very difficult, if not impossible. This is why the decision to stagger them. Sorry if this may not seem aesthetically pleasing, it is a decision made to make it more practical/functional.

@TheMiguelBi

For the AMS Tools (I forgot to mention it in the description), I drew the space for this 3 in 1 version: https://makerworld.com/en/models/55802#profileId-57325 If you want to get the correct kit.

@Eerik

Print Profile

M3version+Accessory_0.2mm layer, 3 walls, 15% infill

came out nicely, thanks 👍

The designer has replied

@TheMiguelBi

wow! This glitter is a fantastic match!

@vampiro2004

really like this and the better half thinks its cute. prints well, also like the fact you can just print the one with nothing in it agin for the other side if you dont want the insert option

(Edited)

The designer has replied

@TheMiguelBi

Thank you very much!

@KW3DP

Boosted

Print Profile

M3version+Accessory_0.2mm layer, 3 walls, 15% infill

great little tool box and print profile

@JayZ

使用 (A1&PLA) 一次打印完成，再网购些五金材料，最后顺利组装成功。 Use (A1&PLA) to print once, and then buy some hardware materials online, and finally successfully assembled.

@bfalk32

Boosted

Printed great, well thought out design and hardware selection.

The designer has replied

@TheMiguelBi

Thank You!

@markraff86

Print Profile

M3version+Accessory_0.2mm layer, 3 walls, 15% infill

This is a great print. organised all the little things that came with my printer and more.(God I never know how annoying those little Nuts and bolts could be until you use them. but worth the effort)

The designer has replied

@TheMiguelBi

Thanks for posting your creation! Yes, the M3 screws are a bit awkward, especially the self-locking nuts! But it will make everything solid and functional!