Bambu Lab X1/X1C - Camera Light Bleed / Purple Hue Fix - Clip On Shield by atvking

atvking

3D Printer>3D Printer Parts

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.28mm layer, 3 walls, 20% infill

Designer

8 min

1 plate

4.6(54)

0.28mm layer, 3 walls, 20% infill

Designer

9 min

1 plate

4.7(20)

Fast but detailed, 0.6mm wall width on 0.4mm nozzle,0.16mm layer, 2 walls, 20% infill

8 min

1 plate

4.7(3)

Open in Bambu Studio

Boost

221

433

711

466

Released

Description

Simple clip/shield for the X1/X1C LED bar to fix the purple hue/light bleed that is visible on the left side of the camera feed in live view/time lapses. Provided to me by Bambu Lab directly after opening a support ticket and I can't seem to find it listed anywhere online yet so I thought I'd share. Only takes a couple of minutes to print.

UPDATE
Please ensure your printer even needs this part. It has been reported by users in the comments that their printer came with this shield built-in. My printer was made in Dec 2022 and did not come with one (obviously) but a user has reported the shield was in place from the factory on their printer that was made in Oct 2023.

I have also added a second model (and print profile) with a slightly deeper recession to allow the clip to grip the light bar slightly tighter as people were asking if the clip should stay on without glue. The original has been working fine on mine but the modification was easy and options are always nice to have.

Comment & Rating (99)

@Omnia

Print Profile

0.28mm layer, 3 walls, 20% infill

the print is great but not necessary for newer x1c‘s. newer means about 3rd quater 2023.

(Edited)

The designer has replied

@atvking

What do you even mean by this?

@Omnia

printing was not a problem. but the printed part has the same size like the lamp. i mean the cover of the lamp has the same size. are there different models of x1c?

(Edited)

@atvking

Replying to @Omnia :

Hmm... Not as far as I'm aware, unless Bambu Lab changed their lightbar for some reason (which I doubt). So you're saying the lightbar won't fit into the recessed side? Are you sure you tried it in the correct orientation with the curved side facing toward the print bed and the notch facing down like in the pic of my install?

(Edited)

@Nitros

Print Profile

0.28mm layer, 3 walls, 20% infill

Work fine

@GianfLab

Print Profile

0.28mm layer, 3 walls, 20% infill

Fast and precise printing

@craigtbii

Print Profile

0.28mm layer, 3 walls, 20% infill

Easy print

@a.schmidt71

Print Profile

0.28mm layer, 3 walls, 20% infill

Die überarbeitete Version passt perfekt und hält ohne Kleber. Danke für die Arbeit

@Acidgurkerl

Print Profile

0.28mm layer, 3 walls, 20% infill

Vielen Dank fürs veröffentlichen!

(Edited)

@AMMAPrints

Print Profile

0.28mm layer, 3 walls, 20% infill

printed great

@d0kt0rgs3

Print Profile

0.28mm layer, 3 walls, 20% infill

it works

@DKdevt

Boosted

Print Profile

Fast but detailed, 0.6mm wall width on 0.4mm nozzle,0.16mm layer, 2 walls, 20% infill

ultraFast print! Very useful tiny upgrade! Thanks for sharing!👍🏻

@frosties

Print Profile

0.28mm layer, 3 walls, 20% infill

4 stars because it seems like the design is so good that Bambu started implementing it into their led bars from the factory! -1 star because I’d have preferred for a not or something to let me know that it might not be needed and to check the printer Edit: just saw the creator updated their description to include a note so changed to 5*. bambu adding it to their printers is probably the ultimate seal of approval.

(Edited)